Wedge Mounts - Series DF
Dynemech wedge mounts are designed for industrial machine tools that require precision leveling. This three piece wedge mount has an adjustable bolt which moves the center wedge between top and bottom stationery wedges to provide lift, to the top wedge. Anti-Skid plate is provided on the top wedge therefore, machines are installed as free standing. Large supporting surface ensures solidity and rigidity. Vibration reduction is possible through assembling respective Dynemech insulation plates .
|
 |
Wedge Mounts - Series DFP
Series DFP have a height of 150/100mm at mean position as per IMTMA guidelines for TPM/TQM norms for machine installation. |
 |
Wedge Mounts - Series DB (Bolt On)
Dynemech Wedge Mounts Series DB is designed for
machines which require precision leveling along with
vibration reduction and are desired to be firmly mounted
with the isolator or machines with high axial thrust
and do require any anchoring in the floor.
|
 |
Wedge Mounts - Series DBP
Series DBP have a height of 150mm/100mm at mean
position to help proper cleaning and repairing under the machine
. This results in enhanced machine tool reliability i.e. zero breakdowns, reduced operation and life cycle costs which are driving factors for adoption of Total Productive Maintenance (TPM) practices. This has been recommended by IMTMA. |
 |
Wedge Mounts - Series DT
Dynemech Wedge Mounts, Series DT is designed for machines which are top heavy or have eccentric motion or machines which must be anchored top the ground |
 |
Wedge Mounts - Series DTP
Placed at a height of 100-150 mm to facilitate cleaning
and repairing, as per IMTMA guidelines. It in turn helps in
enhanced machine tool reliability. There would not be
breakdowns, and there would be reduced operation and
life cycle costs which are driving factors for adoption of
Total Productive Maintenance (TPM) practices recommended byIMTMA. |
 |
Screw Support Mounts - Series DLC
Dynemech DLC series screw support mounts are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer both low frequency attenuation and stable machine leveling. |
 |
 |
crew Support Mounts - Series DL
Dynemch DL Series is used for light to medium weight machines suited to leveling screw support or having tapped hole in the base. |
 |
 |
Compression Mounts / Shear Mounts
Stud Mount/Series DS
Dynemech stud mounts, Series DS are highly effective and compact vibration dampers for a variety of applications like -compressors, pumps, ID & FD fans, motors, machine tools, gensets, air conditioners, measuring and testing equipments/instruments, material handling equipments, laboratory equipments etc.
Avilable with Male-Male Threading, Female-Female Threading, Male-Female Threading, Male and Female only threading.
These mounts can be used for load applications in both compression and shear. |
 |
 |
Compac Mount/Series DH
Dynemech compac machinery mounts uses rubber in compression and shear. They provide tight tolerances on stiffness rate for accurate vibration calculations. Load range is from 40 to 130 Kgs per piece. The strong base metal withstands high shock loads without deformation. Fitted as standard with a shock-proof device (up to 4.5g) with resilient stop,it is ideal for mobile or marine use. Domed shape cover to protect against oil contamination. Light weight and compact. Ideal for Diesel engines, Compressors, Cooling Towers, Pumps, Industrial generators, Marine generators, ID, FD Fans etc |
 |
|
