| Hydraulic Jacks & Equipment : |
| We are authorized dealers for the entire range of TANGEE OEW brand of hydraulic & pneumatic torque wrenches, hydraulic jacks, cylinders, hand pumps, motorized and pneumatic driven power packs and construction related hydraulic cylinders & equipment in the area of north coastal Andhra Pradesh.
|
- Hydraulic Torque Wrench
- Hydraulic Low Height Flat Jacks
- Hydraulic Single Acting Cylinders
- Hydraulic Presses
- Hydraulic Double Acting Cylinders
- Hydraulic Nut Splitters
- Hydraulic Tyre Remover
- Stud Tensioners Bolt Stretching Devuces
- Hydraulic Power Packs
|
|
|
|
| HYDRAULIC TORQUE WRENCH FROM PLARAD GERMANY : |
The compact torsion resistant titanium housing guarantees a long lifespan and a high reliability. The finely splined system and the spherical drive system (patented) ensure a high torque repeat accuracy. The separate high pressure safety cylinder (patented) ensures a safe operation under high pressure and a reasonable service.
The reinforced loosening shock absorber in the front part of the housing protects the tool and the personnel from the implications of the extreme loosening shock. The 360 deg revolving reaction arm ensures the optimal support for every application.
Torque range |
100 Nm - 65000 Nm |
Working Pressure |
800 Bar |
|
|
 |
|
 |
| HYDRAULIC LOW HEIGHT FLAT JACKS - 700 Kg/cm2 : |
Flat Jacks incorporate the Optimum Stroke in the minimum closed height to give lifting force in confined places of work. Strokes being very limited and the area of working being almost inaccessible, extra care should be taken to ensure that the piston does not exert load on the gland nut, Mounting bolt holes are provided for positive fixing.
| Capacity |
5-200 Tonne |
Stroke |
5-25 mm |
Type of Ram |
Plain |
|
|
|
| HYDRAULIC SINGLE ACTING CYLINDERS LOAD RETURN - 700 Kg/Cm2 : |
Heavy duty Jack / Ram /Cylinder for higher loads where retracing need not be spring. Larger strokes available on request.
| Capacity |
50-1000 Tonne |
Stroke |
50-300 mm |
Type of Ram |
Plain |
|
|
 |
|
 |
| HYDRAULIC PRESSES : |
» Workshop presses for applications, e.g. repair or maintenance operations.
» OEW workshop presses are designed for maximum strength and easy handling.
» A large variety of sizes and capacities will match your applications requirements.
» A large selection of hydraulic cylinders with various capacities ans strokes are available as well as single or 2 Stagehand pumps, electric pumps or air-hrdraulic pumps.
Adjustable bed positioning, allowing adjustment of under and lower bed.
Pump table can be moved sideways allowing for convenient operation from both ends. |
|
|
| HYDRAULIC DOUBLE ACTING CYLINDERS - 700 Kg/Cm2 : |
Heavy duty Jack/Ram/Cylinder for Quick Retracing, Horizontal, Vertical and Inverted Operations. Suitable Loads may be attached to the Piston Rod as well , if required.
Double Acting Cylinders are designed to operate in both Pushing and Pulling directions under pressure. These cylinders are recommended for Faster Cycle Operations. Larger Strokes available on request
| Capacity |
5-500Tonne |
Stroke |
75-300mm |
Type of Ram |
Plain |
|
|
 |
|
 |
| HYDRAULIC NUT SPLITTERS - 700 Kg/Cm2 : |
The Hydraulic Nut Splitters are designed to solve your problem of opening Rusted/Jammed Nuts (10 mm - 75 mm) . These Nut Splitters are provided with High Tensile Cutting Heads. They are light in Weight and are Easy in Operation.
Note:- The Nut may only /late & not split. |
|
|
| HYDRAULIC TYRE REMOVER -700 Kg/Cm2 : |
Hydraulic Tyre Remover is quick in action and reduces the effort tremendously for unseating of Tyre Beads on earth movers having tyre dia. 25" (625mm) to 49"(1245mm). This tools is of 10 Tonne capacity , Light in weight and equipped with 2 metre long Hose and Power Source. (i.e. Hand Pump / Air Operated Pump). |
|
 |
|
 |
| STUD TENSIONERS BOLT STRETCHING DEVICES -700 Kg/Cm2 : |
Stud Tensioners are used to Pre-Load the Studs with Equal Tension prior to tightening the nuts as well as to facilities easy unscrewing of the nuts. Jacking system and adopter sizes also available to suit your requirements. Special design of Stud Tensioners also available on request where the diametrical space is restricted.
| Capacity |
30-145 Tonne |
Stroke |
5 mm |
|
|
|
|
|
| HYDRAULIC POWER PACKS -700 Kg/cm2 : |
OEW Electrically operated pumps are compact , portable & light. These pumps are equipped with 3-way / 4-way valves for Single / Double Acting Cylinders respectively.
The Power Pack includes Direct Online Starter / Electrical Control Panel whenever required. The oil reservoir capacity depends on the stroke volume of the cylinder(s) to be operated . Available with Hand / Electrically operated Directional Control Valves. Petrol Engine / Diesel Engine operated Power-Packs are also available on request. The Power-Packs can be designed to meet specific customer requirements |
|
|
 |
|
